Water and particle contaminations are a major cause of critical effects in oil. When contaminated with
water, oil life (base oil damage, loss of additives, etc.) accelerates corrosion of equipment, and the
lubricating film is depleted, causing metal-to-metal contact. Metal-to-metal contact causes abnormal wear
within the equipment, resulting in equipment failure. Water in the oil exists in three forms (free, emulsified,
and dissolved). If water inflow or is caused by condensation, you must quickly measure and find a solution to protect.

• Available of measuring water content in lubricants / hydraulic oil without reagents
• Built-in battery and handy type immediately measure sample oil regardless of any sites.
• Remaining useful oil life and oil quality can be measured (advance consultation required.
Additional costs may apply)